Dynamic stability of a class of fractional-order nonlinear systems via fixed point theory

In this paper, the problem of the uniform stability for a class of fuzzy fractional-order genetic regulatory networks with random discrete delays, distributed delays, and parameter uncertainties is studied. Although there is a portion of literature on using fixed point theorems to study the stability of fractional neural networks, most of them required the fractional order to be in $\left(\frac{1}{2},1\right)$. However, the case of the fractional-order belonging to $(0,\frac{1}{2})$ has not been discussed. To solve it, this work proposes a novel idea of using fixed point theory to study the stability of fuzzy (0,1) order neural networks, the problem of the uniqueness of the solution of the considered genetic regulatory networks is resolved, and a novel sufficient condition to guarantee the uniform stability of above genetic regulatory networks is also derived. Eventually, an example is given to demonstrate that the obtained result is effective.     

Copolymer architecture effects on the morphology and surface performance of epoxy thermosets containing fluorinated block copolymers

The architecture effects on phases and surface enrichment behaviors of epoxy nanocomposites containing fluorinated block copolymers are investigated by the incorporation of two novel copolymers composed of poly (2, 2, 2‐trifluoroethyl methacrylate) (PTFEMA) and poly (ε‐caprolactone) (PCL), PCL‐b‐PTFEMA and PTFEMA‐b‐PCL‐b‐PTFEMA, with identical molecular weight and composition. These fluorinated copolymers in epoxy display distinguished self‐assembled structures, as evidenced by dynamic laser scattering and scanning electron microscopy measurements. Static contact angle detection suggests that the nanocomposites display an obvious improvement in surface water repellency and a reduction in surface free energy. The enhancement in surface hydrophobicity is attributed to the enrichment of PTFEMA blocks at the nanocomposite surface and to the formation of the specific surface morphology, as confirmed by atomic force microscopy. The different architectures of the two block copolymers give rise to differences in phase‐structures, and the ultimate surface performances of composites. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1037–1045     

Photocatalytically Renewable Micro‐electrochemical Sensor for Real‐Time Monitoring of Cells

Electrode fouling and passivation is a substantial and inevitable limitation in electrochemical biosensing, and it is a great challenge to efficiently remove the contaminant without changing the surface structure and electrochemical performance. Herein, we propose a versatile and efficient strategy based on photocatalytic cleaning to construct renewable electrochemical sensors for cell analysis. This kind of sensor was fabricated by controllable assembly of reduced graphene oxide (RGO) and TiO₂ to form a sandwiching RGO@TiO₂ structure, followed by deposition of Au nanoparticles (NPs) onto the RGO shell. The Au NPs‐RGO composite shell provides high electrochemical performance. Meanwhile, the encapsulated TiO₂ ensures an excellent photocatalytic cleaning property. Application of this renewable microsensor for detection of nitric oxide (NO) release from cells demonstrates the great potential of this strategy in electrode regeneration and biosensing.     

Separation and purification of five alkaloids from Aconitum duclouxii by counter‐current chromatography

C₁₉‐diterpenoid alkaloids are the main components of Aconitum duclouxii Levl. The process of separation and purification of these compounds in previous studies was tedious and time consuming, requiring multiple chromatographic steps, thus resulted in low recovery and high cost. In the present work, five C₁₉‐diterpenoid alkaloids, namely, benzoylaconine ( 1 ), N‐deethylaconitine ( 2 ), aconitine ( 3 ), deoxyaconitine ( 4 ), and ducloudine A ( 5 ), were efficiently prepared from A. duclouxii Levl (Aconitum L.) by ethyl acetate extraction followed with counter‐current chromatography. In the process of separation, the critical conditions of counter‐current chromatography were optimized. The two‐phase solvent system composed of n‐hexane/ethyl acetate/methanol/water/NH₃·H₂O (25%) (1:1:1:1:0.1, v/v) was selected and 148.2 mg of 1 , 24.1 mg of 2 , 250.6 mg of 3 , 73.9 mg of 4, and 31.4 mg of 5 were obtained from 1 g total Aconitum alkaloids extract, respectively, in a single run within 4 h. Their purities were found to be 98.4, 97.2, 98.2, 96.8, and 96.6%, respectively, by ultra‐high performance liquid chromatography analysis. The presented separation and purification method was simple, fast, and efficient, and the obtained highly pure alkaloids are suitable for biochemical and toxicological investigation.     

Study of the matrix effects of tetrodotoxin and its content in cooked seafood by liquid chromatography with triple quadrupole mass spectrometry

Tetrodotoxin is a marine biotoxin with high acute toxicity. The levels in cooked seafood will help us to assess its intake in humans and may help assess the risk of toxicity. However, heavy matrices hinder the direct quantitation of tetrodotoxin. A quantitative method of measuring tetrodotoxin in cooked seafood using liquid chromatography with triple quadrupole mass spectrometry was established in this study. Tetrodotoxin was extracted from the sample matrix using 2% formic acid in methanol and cleaned using a cation exchange cartridge. The cleanup conditions were optimized. The matrix effects were determined using the postextraction spiking method and by comparing the slope of the linear regression equation in sample matrix to that in solvent. The limit of detection in the sample matrix was 5 μg/kg and the limit of quantification was 10 μg/kg. The mean recoveries at three spiking levels were 66.9–89.2% with relative standard deviations of 5.0–10.8% (n = 6) in five different matrices. Tetrodotoxin was found at concentrations of 26.1–2462 μg/kg in nine of 83 cooked seafoods tested in this study. Eight analogs of Tetrodotoxin were detected in the samples studied.     

Determination of hexavalent chromium in traditional Chinese medicines by high‐performance liquid chromatography with inductively coupled plasma mass spectrometry

An analytical method that combined high‐performance liquid chromatography with inductively coupled plasma mass spectrometry has been developed for the determination of hexavalent chromium in traditional Chinese medicines. Hexavalent chromium was extracted using the alkaline solution. The parameters such as the concentration of alkaline and the extraction temperature have been optimized to minimize the interconversion between trivalent chromium and hexavalent chromium. The extracted hexavalent chromium was separated on a weak anion exchange column in isocratic mode, followed by inductively coupled plasma mass spectrometry determination. To obtain a better chromatographic resolution and sensitivity, 75 mM NH₄NO₃ at pH 7 was selected as the mobile phase. The linearity of the proposed method was investigated in the range of 0.2–5.0 μg L^?1 (r² = 0.9999) for hexavalent chromium. The limits of detection and quantitation are 0.1 and 0.3 μg L^?1, respectively. The developed method was successfully applied to the determination of hexavalent chromium in Chloriti lapis and Lumbricus with satisfactory recoveries of 95.8–112.8%.     

Ferrocenylethynyl‐Terminated Azobenzenes: Synthesis,Electrochemical, and Photoisomerization Studies

Ferrocenylethynyl‐terminated derivatives 8 – 12 have been synthesized and characterized by electrochemistry and UV/Vis spectroscopy. The electrochemical and photophysical studies indicate that the electronic communication in ferrocenylethynyl‐substituted derivatives is strongly influenced by the substituted position of the ferrocenylethynyl moiety. In situ electrochemical oxidation or chemical oxidation caused a characteristically weak ligand‐to‐metal charge‐transfer (LMCT) band to appear at 700–1000 nm. Subsequent electrochemical reduction or chemical reduction recovered the most of the original curve and the color of the solution as well. Among the derivatives, compound 8 exhibits the highest cis/trans molar ratio (64:36) in the photostationary state (PSS) upon light irradiation at 365 nm. Compound 8 exhibits excellent fatigue resistance and reversibility under several repeated reversible isomerization cycles.